Updated ~ Please follow the latest video guide – How to Install CWM NAND Android on HTC HD2? (Video) to install NAND Android ROM

Install NAND Android on HTC HD2 with ClockworkMod Recovery is the 2nd method to have NAND Android on HTC HD2. And this can be done by using SD card only without PC. Just download the zip ROM to your SD card and you are ready to go. In addition, you can backup and restore ROM using Nandroid. Or you can try the 1st method through DFT MAGLDR Bootloader which requires PC with USB connection.

Prerequisites

  • HSPL3 ~ SPL-2.08.HSPL
  • Radio that support 576 RAM
  • DFT MAGLDR Bootloader
  • ClockworkMod Recovery

Having NAND Android on HTC HD2 is not a simple task like ABC. But it is not mission impossible too. Just follow these guides to get all the prerequisites installed. Please install HSPL3 by follow the guide ~ How to Install HSPL3 on HTC HD2? (Video). How to Install Custom Radio ROM on HTC HD2? (Video) to install radio ROM 2.15. Then, install DFT MAGLDR Bootloader with this guide ~ How to Install MAGLDR on HTC HD2? (Video). Finally, How to Install ClockworkMod Recovery on HTC HD2? (Video) to install ClockworkMod Recovery. Wow… Lot of steps but worth it. Trust me…

Note – Skip copy .data folder if you are using other Android ROM. Just copy the Android ROM zip file to SD card will do.

Step by Step Guide

  1. Power on your phone and don’t let go power button.
  2. DFT MAGLDR Bootloader will be loaded.
  3. Use volume down button to go down to 3. USB MassStg.
  4. Then press call button to enter USB Mass Storage mode.
  5. Connect USB cable from PC to phone.
  6. At PC, open Removable Disk (SD card storage).
  7. Open JawsMIUIrec1.0.7z with 7-Zip.
  8. Copy .data folder and JawsNandRec1.1.zip to SD card root level.
  9. There should be config and data files in .data folder.
  10. Then disconnect USB cable from phone.
  11. Press power button to go back.
  12. Use volume up button to go up to 1. PowerDown.
  13. Then press call button.
  14. Power on phone and don’t let go power button.
  15. DFT MAGLDR Bootloader will be loaded.
  16. Press call button to load 1. Boot AD SD.
  17. ClockworkMod Recovery will be loaded then.
  18. Use volume down button to go down to ‘install zip from sdcard’.
  19. Then press call button.
  20. Use volume down button to go down to ‘choose zip from sdcard’.
  21. Then press call button.
  22. You should see JawsNandRec1.1.zip.
  23. Then press call button to select it.
  24. Use volume down button to go down to ‘Yes – JawsNandRec1.1.zip’.
  25. Press call button and installation will be started.
  26. When you see ‘Install from sdcard complete’, press power button.
  27. Press call button to select ‘reboot system now’.
  28. Phone will be rebooted and enter NAND Android automatically.
  29. Follow onscreen instructions to setup Android settings.
  30. That’s all.

Download Jaws-MIUI base on MIUI 18-12 [Kernel: prj0.3] NAND ZIP ROM + DATA.IMG here.

via: xda-developers

Related Entries