How to fix USB init failed RSPL\RSPL.cpp (723) on NAND Android installation?

There were several readers who had issue during NAND Android installation. They faced Error Description: USB init failed ~ Info: .\RSPL\RSPL.cpp (723) issue. Basically, this happens on Windows XP which uses ActiveSync.

How to fix USB init failed RSPL\RSPL.cpp (723) on NAND Android installation?

  1. Load Android Flasher mode.
  2. Connect USB cable from PC to phone.
  3. You should see MAGLDR with ‘Wait USB…USB’.
  4. Go to control panel and then ActiveSync.
  5. Uncheck allow USB connections.
  6. Then execute DAF.

This should solve USB init failed RSPL\RSPL.cpp (723) issue for Windows XP users…

133 COMMENTS

  1. scratch my previous post on MAGDLR – i got past this and then got stuck at this point but Jayce this has done the trick – hopefully android is installing successfully!
    Right i better get ready for work hehe

    • aha a little patience paid off and it all worked with only a few mins to dash out of the door and get to work – on got there on time but in all the kerfuffle i left my lunch at home!

      All is well now so far

  2. i tried doing this, but it does not connect to USB on magldr screen on my device.. and its giving the same error on android bootloader

  3. the above method did not solve the problem. i will trie installing on a WINDOWS VISTA/7 PC today. i will let you know the results . thankxxxs

  4. THANKS YOU ROCK MI HD2 IS BETTER THAN EVER WITH ANDROID AS NAND! ONE MORE QUESTION ? DO YOU HAVE THE ROM FOR GINGERBREAD 2.3 FULL OPERATIVE AND HOW TO INSTALL IT? AND WERE CAN I MADE A DONATION FOR YOU BRO ! SAVE ME A LOT OF MONEY CAUSE I WAS THINKING ON GETTING A NEW CELL

  5. Hi Jayce,

    I was asking for help for “SD Kernel open failed” error… search through all forum… tried all that is posted but none working…… finally I found the problem…

    <> !!!

    I bought a new SD card (8G Class 4 Kingston ) as a backup to try NAND Android, for some reason, it cannot be recognized by MAGDLR…. So I plugged in my old SD Card ( provided with the phone when I purchased ) WALAH !! My ClockmodRecover Works !!!

    Tried many different to reformat my new SD card, but still cannot be recognized by MAGDLR… so use it as my backup…. any clue ??

    • I am using Kingston 4GB Class 4 card. No issue for me. Try to delete all partition on your SD card. Then create only 1 FAT32.

      By the way, you do have initrd.gz and zImage files in your SD card, right? Else ClockworkMod Recovery won’t be loaded.

  6. 1 more request: could you please help me with a tutorial for how to install 2.2 froyo on my sisters HTC ARIA unlock help please and also the roms

  7. please help how can i do this i hate it can you make a movie to help us ? Load Android Flasher mode how can i load it? please send me fast an answer with mail or here please !

  8. Still facing the “”RSPL.cpp (723)”” problem after I did the steps above. Using Windows Vista, unchecked the allow USB connections in the Windows Mobile Device Center in Control Panel. But same error shown in DFT Android Flasher windows.

      • Thanks for ur prompt reply.
        Tried rebooting several times and even updating the USB driver (which always show UP TO DATE). But problem still exist.

        This problem happened only after I flash Task29. Before this, I was having Android on my HD2 but the freezing problem keep happening.

        From other forums… seems like this problem shouldn’t be happening on Vista platform. But unfortunately I got it. 🙁

  9. this will sound pretty stupid, as i manged to do this last month before restoring the phone, but i can’t find activesync in the control panel (and im using xp)

  10. I’m in the process of installing this awesome ROM now. I will let you know how it turns out. If I follow your instructions to the letter and it works out, I would like to know if you have a donations link.

    One more thing, on the CMYLXGO’S Topia HD Android ROM I was not able to factory reset the device no matter what method I tried. I was hoping if I am able to perform a factory reset on this NAND Android ROM…short of having to reflash the ROM of course lol.

    Hit me back whenever you can and thanks in advance.

  11. Have a ?

    Whenever I flash a new ROM on the HTC hd2 do I have to give it root access every time I do this? Reason why I’m asking is because a certain app called My Backup Pro requires root access to restore not only my apps and data but also restores the data stored on those apps as well.

    Awaiting for your response and thanx again for that awesome “stock” Android ROM!

      • and before that I had the same error msg , although I did all above steps ,. I even installed win 7, dlded win mobile center., and unchecked usb boxs, yet still stuck on waiting usb … usb .
        problem is that it is my first time to install ROM. and I can’t get back to my previous HTC OS win 6.5. so I’m stuck with the black screen of MAGLDR , plzzzzzzzzzzzzzzzzzz help

  12. Hi I am successful till step 21. I am using XP, when i rightclick i have “run as” option not “run as administrator”. Also I dont have administrator rights on my laptop. Please advise. Is there any otherway. Thanks.

  13. I finally got MAGDLR with the ten point menu, but now i have a different issue
    orange words
    -reboot system now
    -apply data from sd card
    -wipe data/factory reset
    -wipe cache partition
    -install zip from sd card
    -backup and restore
    -mounts and storage
    advanced

    followed by:
    E:Can’t find misc
    E:failed to find “cache’ partition to mount at ”
    /cache”
    E:Can’t mount /cache/recovery/command
    E:Can’t find misc
    E:failed to find “cache’ partition to mount at ”
    /cache”
    E:Can’t mount /cache/recovery/log
    E:failed to find “cache” partition to mount at ”
    /cache”
    E:Can’t mount /cache/recovery/last_log
    E:Can’t open /cache/recovery/log
    E:Can’t find misc
    E:failed to find “cache” partition to mount at ”
    /cache”

    I hope you can help, on a budget and can not afford to get a new phone

  14. Jayce please help!

    When trying to install Android (Desire) on my HTC HD2 I get an error: Info: .\RSPL\RSPL.cpp (723).
    Im using Windows Vista, Im administrator and in Active Sync (Windows Mobile Devicecentre) I have unticked the box: Allow usb connections. It still does not work, i still get the same error. Btw it shows SD kernel open failed.

  15. I loaded aMAGLDR V1.13 Build: Feb1, 2011 by Cotulla. For about a month now my screen locks at the boot menu(I assume) my screen reads:

    Booting Android from NAND
    ANDROID LOAD at 11800000
    from NAND
    yaffs2 part is/boot
    Load z Image
    Load initial.gz
    [K]11808000:237098[I]12200000:37222
    Load done!1E FATAL HIT 1

    It was working fine for a few weeks then this started happening. Can I uninstall and reload? What option do I have for a fix? Thanks in advance.

  16. Help pls!
    I had android nand on my htc hd2 with jaws rom n i had a problem with battery draining so i updated the rom from miui rom update applicatin after that the device is crushed 🙁
    it runs only the first mgdldr v1.11 which shows :

    booting android from nand
    android load at …..
    ……….
    ……..
    till go go go !
    and then nothing more 🙁 the problem can’t sync it with my PC i don’t know why so i can redo the whole procedure from the beginning to recover it …help pls.
    thank you

  17. I would like to thank you very much for helping me …I’ve Finally Managed to fix my HTC HD2 using the link you have recomended already

    you should be the next Steve Jobs 😉

    cheers

  18. hi anybody
    plz tell me i have a error on any system espect 1 window7 highly system. i have hd2 and when i flash or install hspl it is no show usb on screen but i unplug serial is show on screen. and usb driver was not install in any window.

  19. i installd on my hd2 android 2.3.5 and i want install Pyramid_HTC_WWE_1.35.401.1_v2.2_EU or sensation xl rom on hd2
    plz tell my any body with full detail. i am very thankfull for who tell me.

  20. I’m waiting for USB for too much time to connect but it’s not, can any one tell me what to do? I deactivate AUTO CONNECT FROM ACTIVESYNC. PLZ help

  21. hello, after installing hspl 3.03 im getting this error when i try to install magldr 1.13

    An error has occurred
    Read below for more information

    Error Description: Config load failed.
    Info: .\RSPL\RSPL.cpp (725)

    Error Description: CONFIG: can’t open config file
    Info: .\RSPL\RSPL.cpp (304)

    was running 1.11 successfully with hspl 2.08

    kindly help

  22. now I’m in big serious problem, my phone didn’t start with any thing except this…………… (stick together)………..nothing else, plz help

  23. I installed radio again 2.15.50 & DFT MAGLDR, and now I access to MAGLDR boot screen, but still I can’t install NAND, I tried 2 laptop to solve but nothing done……PLZ PLZ PLZ PLZ i need a final solution

  24. Hola Jayce!, thank for tutorial! My error is as follows:
    An error has occurred
    Read below for more information

    Error Description: Config load failed.
    Info: .RSPLRSPL.cpp (725)

    Error Description: CONFIG: can’t open config file
    Info: .RSPLRSPL.cpp (304)

    wait your response!

    Thankkkk!!!!

  25. Hi,
    my problem is when it goes to your step 3;You should see MAGLDR with ‘Wait USB…USB’. but mine only Wait USB…’ seems it doesnt connect to the pc. So, how to fix that. tq…
    hafiz

  26. while opening DFT I am getting this message Error happen
    Read below for more information

    Error Description: Config load failed.
    Info: .\RSPL\RSPL.cpp (712)

    Error Description: CONFIG: can’t open config file
    Info: .\RSPL\RSPL.cpp (291)
    please help

  27. jayce…. av bin avn a problem flashing clockworkmod on my HD2!! it has magldr 1.11 n i dont knw hw to upgrade it 2 MGLDR 1.13! heeeeeellllllllllllllppppppppppppppp!!!!!!!!!!!

  28. Hi Jayce,

    i m trying to convert ICS on my HD 2 and did HSPL2, Radio 2.15 and MAG but while doing recovery procedure m getting below mention error continuously. pls guide me on this.

    An error has occurred
    Read below for more information

    Error Description: USB init failed
    Info: .\RSPL\RSPL.cpp (736)

    Error Description: EnterBootloader missing
    Info: .\RSPL\BootLoader.cpp (176)

  29. Hi, m following the instructions which mention on below site

    https://www.jayceooi.com/2011/11/21/how-to-install-android-4-0-ice-cream-sandwich-on-htc-hd2-video/

    please help me, as per instruction given i complete HSPL4, Radio 2.15.50.14 and DFG MAG successfully but when m trying for recovery above mentioned error is coming on the screen and m not able to proceed further.

    then once again i came back on windows 6.5 but i need to experience ICS on my Htc Hd2

    kindly advice

    awaiting for your positive and soonest reply with full detail help and support.

    thanks and best regards,

  30. i cant download the files from the given link kindly assist me.. am using HTC TOUCHPRO 2 SPRINT…PLS I NEED TO GET RAID OF THE WINDOWS SYSTEM ON MA HTC

  31. during DWI installation, it worked fine until it reached flashing 4th partition it stopped and show following errors:
    An error has occurred
    Read below for more information

    Error Description: send d000ff partition data failed
    Info: .\RSPL\RSPL.cpp (1279)

    Error Description: block send fail
    Info: .\RSPL\RSPL.cpp (962)

    Error Description: Block is after end.
    Info: .\RSPL\RSPL.cpp (704)

    I did change several external cards but without success.
    I have seen the video the flashing partitions upto 7th before reset to start phone.

    Thanks for your help and advice.

  32. help me!! please!!
    부탁드려요!

    My current situation is installed magldr,
    Hd2’s display to me,…

    ——————————-
    USB Flasher mode
    wait USB … USB
    ——————————-

    Then, I opened the “DAF.exe”
    Then, when you press the next button,

    ——————————
    Readme.txt for this release is missing.
    ——————————–

    When you press the next button again to open as this,

    ——————————–
    An error has occurred
    Read below for more information

    Error Description: Config load failed.
    Info: \ RSPL \ RSPL.cpp (725)

    Error Description: CONFIG: can’t open config file
    Info: \ RSPL \ RSPL.cpp (304)
    ———————————–

    … Error;
    …. What can i do? ,,,
    help me ㅠㅠ

LEAVE A REPLY

Please enter your comment!
Please enter your name here