How to change CSC on Samsung Galaxy S3?

Samsung Galaxy S III firmware has 3 main components ~ PDA, PHONE and CSC. PDA == build version of the firmware, PHONE == baseband / modem version and CSC == consumer software customization (specified to geographical region and carriers). CSC contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS for your service provider. You can change CSC if you have Multi CSC packages like below example. By the way, only Samsung Galaxy S3 firmware with correct PDA, PHONE and CSC combo will get updated with Samsung Kies.

Note – This will factory reset your phone. Everything will be deleted. Do backup before perform this task.

Multi CSC

How to change CSC on Samsung Galaxy S3?

  1. Type *#272*Device IMEI# at Phone dial pad.
  2. Select the CSC that you want.
  3. Click Install.
  4. Phone will be rebooted by itself.
  5. That’s all.

Update – if above method did not work for, try CSC Changer.

354 COMMENTS

  1. meaning some guys didn’t get the update due to wrong CSC??

    AP : I9300XXBLH1

    CP : I9300DXLH1

    CSC : I93000LBBLH1

    is it the latest 1? i heard got another small update for modem.

  2. I purchased my phone samsung s3 in New zealand where it had been imported from france, I didn’t have any issues with it there, but I recently moved to Denmark, and I am having major connectivity issues with the carriers over here, could changing my CSC help fix this? cheers

  3. Juz get back my s3 after front camera from Samsung Service centre. Check with kies, I am no longer supported to update via kies, can you suggest which csc code should I select in order to get the update via kies again?

  4. My Galaxy S3 international unlocked factory has BTU code, I want to upgrade to the official I9300XXDLIB Jelly Bean firmware with Odin. My question is: If is neccesary to change the Csc to the XEO code for apply to the JBean firmware?. And my concern is: the Samsung Kies will recognize my model phone after applied the Jelly Bean update with the modified Csc or not?. Thanks

  5. Hi.. i purchased s3 in china.. its already rooted and i want to change the csc.. but only TLS is the option i am getting.. how to change to poland csc to upgrade to jellybean..

    • Hi Sunny, I am not sure that China I9300 hardware is the same as international I9300 or not. If it is the same, you can install other region firmware directly with Odin. It will change CSC automatically based on the firmware that you installed.

  6. Thanks sir for your quick response.. how to check if its same or no. ? I just want to make sure i not end up messing everything..
    AP: I747UCALAM
    CP: I747UCLG1
    CSC: I747ATTALEM

    Does this signifies anything.?
    Thanks

  7. guys, I’m really confused, I just moved from the world of iOS to Android, I have Galaxy S3 with CSC code THR, I live in Libya.

    Kies doesn’t show the new JB fw yet, so does it going to change it if I change my CSC via *#272*IMEI# or it is useless? if I could, then which CSC code should I change to?

    my *#1234# info is:

    AP: I9300XXBLFB
    CP: I9300XXLFB
    CSC: I9300OJVBLF3

    I tried Check Fux Downloader 2.1, but it didn’t show up my firmware info.

    this made me so confused.

    when I try to change my CSC I get the following codes:
    ABS, AFG, AFR, ARB, BTC, ECF, EGY, FWD, JED, KEN, KSA, MAT, MED, MID, MMC, MRT, MWD, PAK, THR, TMC, TUN, TUR, WAN, XFA, XFC, XFE, XFM, XFV, XSG.

    so what should I do?

    thank you for your support to a new comer!

  8. Hello Jayce , i really need some help out here . i wanna change my csc but when i put the *#272*Device IMEI# on the phone dial pad nothing happens and if i press the call boton it says code mmi non valid or connexion problem that problem also happens if i wanna check *#7465625# i’ve searched all over the web and tryed all the solutions on google and xda developer forum .. etc .. but nothing solved the problem would you please try to get the fix for this cz i rly need to change the csc or if there is any other way to change csc would be realy nice and thanks in advance

  9. hello jayce…
    my info is
    CSC:I9300EURALE1
    CP:I9300XXLE8
    AP:I9300XXALE8

    when i try to do ota update its download 21.81mg after this the gs3 is rebot and it go to black screen, its says the update fails and you need to rebot your system…i also try to update via kies but its say
    your phone is not support on this firmware….if i change the CSC the update is be fine and kies will recognize the phone?

  10. Hi. Jayce
    Its my first time posting here, 1st as many other’s here I had the same problem (s3 doesn’t. Support update via skies)
    So I tried csc changing it gave me 3options ttt-tdr-vno and my cache code was afr so done it and kies now supports my s3.but another problem came up I lost my Arabic language from the input for good. I downloaded Arabic keyboard but I really want the locale back so can u help me plzzzz cozy I really tried every thing to regain it back and wiped s3 to factory but same thing nothing changed also done emergency recovery same thing also….any help plzzzz

  11. Tnxx jayce…i have 3 mor little Question πŸ™‚
    1. when i change the csc its change my language to?
    2.after the change csc the galaxy need some code or somthing on the start?
    3.to which csc i need to change to get it work?

    • Sorry osama, no idea on this. Really suspected you install other firmware. As I mentioned, changing CSC won’t do any changes on the firmware itself but CSC.

  12. Hi Jayce

    I got my S3 from Hong Kong. It’s the Australian version as it had Australian apps.
    I have flashed it with jelly bean. But now can’t update with keis.
    I tried to change the csc, but it says my phone only has a single csc, OPS; and doesnt give me option to change it.
    My current phone version:
    AP: I9300XXDLIH
    CP:I9300XXDLID
    CSC: I9300VDSDLI1

    Please help

    Thanks

  13. Hi jaycee, i have check a website which keeps us an update of jellybean regional update. In some country it was officially released. I wanted to change my csc (AFR) to a csc which has a jelly bean regional update already. Is it possible to get notice of new firmware in kies if i do this? Thanks.

  14. i have
    CSC: I9300TPLLH2

    and i use Orange (Austria) and i will change it to the unbranded one can i normally updaded? how about the garanty?

  15. Hi Jayce, some questions please..
    AP : I9300XXBLH1
    CP : I9300XXLH1
    CSC : I9300ITVBLH2

    Unlocked Italy.

    1, if i flash the lastest UK offical firmware
    (KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5)
    for Jellybean, it wont delete my phones data and settings right?
    2, will i still be able to use Kies to back up my data if i follow your method to change the CSC code after?
    3, whats my CSC code for italy please?
    4,then if i want to flash official jelly bean firmware OTA when it gets released, i need to re-flash ICS and change to CSC again right?

  16. Hi, I’m using galaxy s3 and from the codes i noticed that it’s for XSG regoin and *#1234# says
    AP: I9300XXBLH1
    CP: I9300XXLH1
    CSC: I9300OJVBLH1 ( it says UAE, Egypt… Turkey)
    i’m using the phone in Macedonia and my question is should i change the product code or that’s not needed? what i will get if i change the product code?
    Thanks

  17. hi my phone firmware version is xxalf2 i rooted it. Every thing is fine but when i unroot it and flash stock firmware oxxalf2 ilost network when i isert the sim. Without sim network present with emergency call option iam from india

  18. I just download oxxalf2 stock firmware and flash the tar file with odin now the device status is modified to normal but there is no network and a circle display on network bar then i try ota update and it install succsesfully but network is still unavailable when i root it again network show but when i insert the sim network is goneaju

  19. Hi Jayce

    i know it could be repeated question , i have two S3 phones is Egypt , one of them is CSC(MRT) and the other one is CSC(BTC)
    the MRT received JB update , but the other one not yet ! should i change BTC phone to MRT or EGY or leave it as it is ?

  20. I bought S3 in Slovakia. Sunday it shows me error update and it cant get update through OTA in settings. Kies show me “your device does not support software upgrading via kies”. I tried to change csc but it shows only “sales code XEZ” and no CSCs.
    Please, wha dot you recommends me?

  21. Hi Jayce,

    I have a CSC of AFR. would you know which country this is? and even though am not in that country the moment samsung allowed the release of the that country would i still get the updates?

    Need advice since I saw some articles were people change the CSC then they can now start DL JB.

  22. ok .. i am new and just update my S3 firmware yesterday .. Found that kernel version is updated

    my question .. i am using a s3 AP set (believed it for Orange) , and try to change CSC but only FTM option available.

    Is there any way to get the Malaysia CSC ..do i really need ODIN , ROM etc that i previously read on others forum

    thanks

  23. thanks Joyce .. seems that need to change to hardcore user

    before that .. is it really worth to upgrade to JB , since i am put my S3 on risk by using ODIN ?

  24. hello to all.
    i own a galaxy s3 with the csc VD2
    how can i find out which csc is compatible with my country in order to get the new android 4.1?

    p.s
    the KIES software is causing me some trouble, i cant backup my phone. any ideas?

  25. Dear Jayce

    This may come as often repeated, boring (and possibly stupid) question to you, apologies if it does.

    My SIII bought in Australia from Hongkong based firm has following information displayed:

    Model no: GT I9300
    Android Version 4.0.4
    Baseband version: I9300XXLH1
    Build number: IMM76D.I9300XXBLH3
    Kernel version:3.0.15-928452 se.infra@SEP – 70#1
    SMP PREEMPT Tue Aug 21 17:04:13 KST 2012

    I was hoping it would come with Jellybean (as on my Nexus 7 tablet)

    Does everything appear okay and should I just wait for update – or am I missing something?

    I will be grateful for your expert opinion.

    Regards

  26. hi jayce, how can i tell if my CSC code match my firmware? mine is:
    AP: I9300XXBLFB
    CP: I9300XXLFB
    CSC: I9300OJVBLF3
    CSC of AFR

    Thanks in advance! x

  27. Hi dear, i own i9300 s3 an international model with THR (i.e from Tehran Iran), i live in Pakistan and jelly bean is available for Pakistan. My question is that if i change CSC to Pakistan will i be able to get jelly bean? since jellybean status is pending for Iran.
    Regards

  28. Hi !
    I need help please, i just bought a brand new samsung s3 and i am running ICS 4.0.4 when i go to setting and try to update its says no update available i went to KIES directly and it says That Kies does not support the firmware…….
    I tried updating without wifi using my networks (Three) and nothing.
    I checked versions and it was
    AP: I9300XXBLFB
    CP: I9300XXLFB
    CSN: I9300OJVBLF3
    I want to update to the new jelly bean I live in UK can i do something about this please.

  29. hi i own galaxy s3 titanium grey version i wanna know which region it belong to my code is AP = i9300XXBLH1 , CP = i9300XXLH1 , CSC = i9300OJVBLH1

    i live in pakistan and wanted to update to jelly bean wot can i do ?

  30. Hello Mr. Jayce, I need help please. I have a 32Gb Galaxy S3 with Original ICS firmware which has upgraded Automatically to Jelly Bean 4.1.1 and this is the latest version of android.
    Now its current firmware version:
    PDA: JRO03C.I9300XXDLJ4
    PHONE: I9300XXDLID
    CSC: I9300XXDLJ2 (EUR – England)
    It supported Farsi language and I can read Farsi Messages and see Persian Sites; but unfortunately it has not Farsi selection in System Language and in Samsung Keyboard Input Language. I like have an Original Samsung keyboard supported with Farsi language in addition to English in my device. And I don’t like install and use another keyboard application (for example: Go Keyboard) in my device.
    Therefore I want to change only its CSC with Official IRAN CSC (I9300OJVALE9) by flashing the file (CSC_I9300OJVALE9.7z) by Odin Suftware. But just now I want to know if I change my device Original CSC by this way, would I receive its firmware New Next Updates or Upgrades? Or this file changing would make update problem for my device?
    Best Regards
    Yours Sincerely – Dr. Ghandriz from IRAN

    • Hi Dr. Ghandriz, changing CSC does not give you new keyboard. You need to change whole firmware. And by changing CSC this way, you won’t get official update anymore since it does not match to your firmware.

  31. OK, Thank You. Already I have got matched firmware with IRAN CSC (I9300OJVALE9), but it’s version is ICS 4.0.4.
    Can I downgrade my device firmware from 4.1.1 to 4.0.4? Is this idea right? Or you don’t recommend this way? Really what is your best recommendation?

  32. hi im from singapore. i upgraded my gt n7000 firmware last month via kies. im just curious, why does my kies now says that my firmware is not supported for upgrading via kies?

  33. Hi, I have a S3 with XEH (Hungary) i9300XXBLH1 factory loaded firmware (all untouched) on it, but the JB update is taking forever for this region, How can I get the update now? Do I need to flash another country firmware and change the CSC?

    If this phone has multiple CSC available on the phone, can I just change the CSC to a country that has the update such as BTU or others?
    thank you!

  34. Hi,

    I have a galaxy s3 that was purchased in France. Can I flash it with a firmware of Netherlands?
    I live in Netherlands. What do I have to do? I currently have JB installed.

  35. Hi,
    I am from Kuwait and i have upgraded my GS3 to OFFICIAL JB Poland version through ODIN, now kies doesnt allow me to chk for update it shows

    Yours Device’s Current Firmware Version is Not Supported to update Firmware via Kies

  36. Hi Jayce,

    Im in India at the moment and picked up an S3 here. I’m running 4.0.4 and would like to upgrade to the 4.1. I’m having trouble connecting Kies and when I try an ota update, It says there aren’t any available.
    When I bring up my csc options, India isn’t listed either.
    Would it help flashing the phone with the Indian 4.1 Firmware using odin ?
    Would I have compatibility issues with my csc or would the new firmware over ride it ?

    Thanks in advance.

      • Jayce,

        An update on my issue. I downloaded the India baseband 4.1 version and flashed it sing Odin.

        It worked just fine. Now i’m registered officially on the Samsung India servers. Got 4.1 Running. Kies works just great. And I didn’t even lose any of my saved data. CSC now says India too.

        Hope this helps anyone looking to do the same. Cheers.

  37. hi jayce,

    so i got this sgs3 int’l version gt-i9300 and i flashed it with the ultima rom v5.0.2. how do i go back to stock firmware to get the the premium suite upgrade which has been released recently? thank you very much.

    also, congrats on the awesome site!

    mark

  38. Hi,

    I just bought a new galaxy s3 in China which is from China Unicom (Chinese telephone service, I just found out later) and everything is chinese application and there is no play store(I tried installing playstore but once I launch it then it blacks out). So since I will not be using my phone in China can I change the firmware or something? Because Chinese version of 4.1.1 doesn’t allow me to change the CSC. The phone is international version.
    (GTI9300) My Version is:
    AP: I9300ZNDLK4
    CP:I9300ZNDLK1
    CSC: I9300CHUDLK4
    The news I read on the internet is that China Unicom blocks Google and google also blocks china Unicom so I just want to use Play store in other countries not in China. Is there anyway?

    • Hi Osric, I am not sure China SGS3 is using the same hardware as international SGS3 or not. If yes, you can install other region firmware. If no, you can’t do so. Try to consult others at XDA Forum see.

      • Hi Jayce,

        Thank you for your proficient reply I really appreciate it. However I coincidentally found a friend who was using android galaxy note phone for a while so he offered to help root my phone so ones rooted it it was actually really good and able to use playstore without anymore china’s unicom influence. But before that I went to my country Thailand and tried asking their help we went to many stores and many places and waited quite a while no one seems to be able to address the problem until now. I was lucky to find this friend who was super willing to help. But again I really appreciate your reply. If I have any other problems with the china unicom or other android phone I will definitely ask you. BTW I wanted to ask you what are you thoughts on galaxy 4? Since it has many cool features but I heard from friends that it has a problem that it heats up quite fast and many people returned it to the store I do not know whether its true or not but I was actually wanted to buy galaxy 4 but I am hesitating so I would like to know your thoughts and if not galaxy 4 then what android phone would you suggest?

        Thanks again for your help

        Osric

    • i have the solution for you problem, if you still have it, please contact me. i can help you.
      i have a sgs3 china unicom, and i flash it with china modem, and nordic countrys rom.
      it works so good, i am in mexico, and i use it without trouble.

      • Hi Carlos

        Thank you for your help my problem was already address but if I ever found any other problems regarding to the changing the country of the phone I will definitely ask you about it. I am considering buying a galaxy 4 but my friends said it get hot very easy so they return it to the store since I am in need of buying a new phone soon I don’t know which android phone to buy since iphone likes to move on with their products I don’t want to kept one changing the phone to follow them so do you have any suggestions?

        Thank you again

        Osric

  39. hi there , i bought an international version of s3 from palestine where i updated it for the first time with no problems , now i moved to egypt and the jellybean update had been here for a month but i didn’t get it and im not receiving any updates even minor ones , i cant even connect to kies where it says :” your phone does not support software updating via kies” and ota naturaly shows no update available
    the question is why cant i update , is it because for some reason my phone is still connected to my carrier in palestine and i only recieve updates when they begin rolling there ?

    and if i used factory reset would my phone begin getting updates and act as a phone in the Egyptian market ?

    i’m so frustrated by this problem i cant believe no one have an idea how to solve this ,
    please help πŸ™

  40. hi!
    u also use JB right?
    i wanna ask, u say that change csc won’t help to get the latest update from other region right?
    so, if i get from sammobile the leaked or not firmware, example from germany, do i need to change the csc of that firmware to match with my country csc code?
    do you have a list of csc code?
    if i don’t change i’ll get the mess on my sim card, affect the signal performance, and etc??.

    or it just need to be changed on custom rom or firmware?

    • and ex :
      I9300XXELL5 Download (Thanks To SamMobile!)
      Base Firmware: I9300XXELL5 (4.1.2)
      Region: Europe
      Country: Germany
      Carrier: Vodafone
      Build Date: 10 December 2012
      Modem: BUELK1
      CSC: VFGELL1
      Change List: 672976

      above is latest,
      my country is indonesian, so i must changed the csc code to indonesia csc code?
      will it make better the signal?
      will it be a problem if the carrier : vodafone used on sgs3 international GT-i9300?

      • sorry, to confuse you, but ‘ll re-ask since i also confused by the answer..
        based from above example of fw,

        first even the csc is difference (stock or custom), i don’t need to change my csc code, since it’s difference? and not changed, also won’t affect signal or other problems.

        and i have search a little about branded and unbranded difference.
        so above is branded, if mine is international version, i can’t used that firmware? since it’s branded for specific provider or server related to SIM card?

        if it’s unbranded, i can flash it to my phone? (though it’s mean free to use any sim card?

  41. no mean not need?
    ah..
    what i mean is i using the international original from samsung, but i wanna install unbranded firmware?. wait unlock mean international?
    so tat unbranded fw, mean i can use any sim card right?

  42. Hello sir,
    am from Lebanon(middle east) and I have s3 , my friends have the same phones and they got the JB update since days ,,,, am not , here some infos :
    AP : I9300XXBLFB
    CP : I9300XXLFB
    CSC : I9300OJVBLF3

    and when I connect to kies : it shows me :PDA:LFB/PHONE:LFB/CSC:LF3 (AFR)

    what I should I do … thanks in advance

  43. *#272*Device IMEI# not working for me – I have upgraded with ODIN to 4.1.2 I9300XXELL6_I9300OXFELL1_I9300XXELL4 (COA) and on CSC I have “Unknown” instead of COA (which is original firmware). Any solution?

  44. after doing 1234 hash, i get the following values AP: i9300XXALED9
    CP: I9300DXLE8
    CSC: I9300OJVALE9

    I realize that the csc is for europe, however i changed it to africa using the 272 code u had supplied earlier.

    when i try using software update on phone, still o luck.. please help.

  45. Hi,

    I have the following details:
    AP: I9300XXDLJ4
    CP: I9300XXDLID
    CSC: I9300OXFDLJ2

    I live in Cyprus and I am wondering why I dont have the latest update 4.1.2 like 3-4 other friends who already had the update.

    Thanks,
    Chris

  46. I have one question. My baseband version is I9300XXDLID and Build number is ……I9300XXDLJ4
    I have one friend and his number are same. Why mine is different?

  47. Hi Jaycee,i dnt know what to pick on my galaxy s3 CSC Preconfig, cos i dnt know where it came from, i mean the region. do u have any idea how can i know the region of my SGS3? but ryt now my CSC is AFR.

    AP : I9300XXBLFB
    CP : I9300XXLFB
    CSC : I9300OJVBLF3

  48. hy, i have the s3 and my csc is xsg. the problem is that i have not obtained jellybean 4.1.2 yet. do you thnik that if i change the csc to btu for example, will i get the update??

  49. Running SGS3 locked to Tmobile UK (TMU) and JB hadn’t been released

    Flashe, via odin, a stock rom (BTU) version of 4.1.1 at christmas.But since then my CSC has been KOR though and thus Kies not working.

    Flashed today to 4.1.2 of stock TMU but still CSC is KOR. I am not rooted (and a noob) and just want kies to now recognise my phone

    any help???

      • Nope. Goes to dial and comes up with “Connection problem or invalid MMI code.

        Apparently since I updated last night I dont have any mobile data either now? Maybe that has something to do with it? Still have phone signal but no data

        • the net work issue is no longer a problem, factory rest and its back, but still getting the β€œConnection problem or invalid MMI code”

          Tried a CSC changer off Play Store and it comes up with, “PreconfigUI does not support SIngle CSC”

          • ok. apparently after all this, ive plugged it into Kies this morning (UK), must have done it 6 or 7 times last night, and it apparently is now TMU and works.

            Thank you very much for the help!

  50. I broke my phone and got a replacement handset sent under Orange Care, The phone has absolutely no bloatware but it’s still locked to orange, Another thing my phone has is the option for OTA updates, whereas most orange phones have had that removed from their options. When i click it it instantly comes up with “No Update available”, The ridiculously annoy part is when I plug my S3 into Kies, when it doesn’t come up with the furiously irritating “HardwareID Missing”, It comes up with “This device is not compatible with updating via kies!

    Model Number GT-I9300
    Baseband Version I9300XXLH1
    AP I9300XXBLG8
    CP I9300XXLH1
    CSC I9300OXABLG8

    Anyone able to help?

    Thanks.

  51. my csc is afr my phone is galaxy s3 and i want to download the jelly bean 4.1.2 and i didnt find this rom with the code afr should i change my code cuz i found a rom with xsg code or should i wait
    and i can download the diffrent code rom with my odin program or not ?
    thanks u

  52. Hi jayce i have a samsung galaxy s3 for region mid (iraq). And the jelly bean 4.1.2 is out for all arabs country without it (mid) till now so if i change the csc code to another one who gets the update like egy ksa xsg i will get the update ?? And it will cause any thing for the phone ?? Please guide me to change it and update my device πŸ™‚ and thx

  53. Hey Jayce,

    I bought a Galaxy S3 – GT-I9300 from Qatar, the phone is imported from France and the phone’s CSC is XEF, its the CSC of France…that means will I get updates from France even though I’m not in France?

    Thanks!

  54. Hi I really need your help I recently purchased an unlocked galaxy s3 from Hong Kong to Australia and I’m trying to update it to jellybean but it says no update available this is my version info
    Ap: i9300xxblfb
    Cp: i9300xxlfb
    Csc:i9300ojvblf3

    I was wondering if I changed my Csc to the Australia one will I be able to update my phone and will this cause any problems eg bricking your phone ? Please reply I’m desperate oh btw the jelly bean update arrived in Australia ages ago

  55. hello sir . thank you for this useful method. I changed my country code and I installed the 4.1.1. ….

    now the 4.1.2 is rolling out to my country my friends update it now .. but for me when I check up the update it says : access to update ia provided to users in order wich they request it …. is this normal? and I can get the new update ? note again that my country code is MID
    thanks sir πŸ™‚

  56. Hi, just want to ask what a different malaysia and oversea firmware, my device is AP set (Germany) i update firmware (malaysia or Germany firmware) which is better ? i live in malaysia..
    thank for reply.

  57. whats the CSC for USA? Type *#272*Device IMEI# at Phone dial pad. – didnt work for me… Do you have a updated version of this article?

  58. i brought S3 from a friend …. in status page (( my phone number )) always shows my friend’s cell No

    how i can change this No … to put mine

    plz help …..

  59. i removed my SIM then powered my phone ON(( my phone number )) shows ( Unknown ) then put it back ….. and still my friend’s No appear

    i guess the Prob from y SIM card as u said ..

    i’ll try to check my SIM or put it in another Cell phone

    thnx for help

  60. Hi !
    I need help please, i just bought a brand new samsung s3 and i am running ICS 4.0.4 when i go to setting and try to update its says no update available i went to KIES directly and it says That Kies does not support the firmware…….
    I checked versions and it was
    AP: I9300XXBLH1
    CP: I9300XXLH1
    CSN: I9300OJVBLH1
    I want to update to the new jelly bean I live in Afghanistan, can i do something about this please.

  61. When i conect ma phne with kies i got message lyk ur phne not supportd to update via kies sir ma phne purchase in kuwait bt i used it india i gess problm.is tht only.chnging.counrty n.idint resev jelly bean update becoz of des yet help me out can i chng ma csc code ma curent code is afrn yah what counrty des afr indicate plz plz helpe out

  62. Em trying to update ma sg3 to jelly bean bt samsung kies showing tht msg
    N em.still not reseave update plz help me.out ma.curnt csc code is afr
    Afr? Indicate which country

  63. Plz tell me how i can update ma phne when ota show no update available
    N kies showing tht same particulr msg

    Ma current counrty is india

  64. hi sir, can you help me update my firmware to 4.1.2? i guess thats the latest right? I bought my phone in UAE and im currently living in UAe. i tried using kies but it always says ‘ur device current firmware version is not supported to update firmware via kies’..huhu ='(

    current fimware version: PDA: LJ1/ PHONE:LID/ CSC: LJ1 (AFR)
    AP : I9300XXDLJ1
    CP : I9300XXDLID
    CSC : 19300OJVDLJ1

    what should I do? should i change the csc?
    Please help me sir.. i would really appreciate it. thank you

  65. Hi I hope you can help me.i have problem with network cower and want to give back to warranty …to vodafone.i was rooted . So I unroot my phone by stock rom for sgs3 for vodafone ireland (VDI) everythink is fine until I didt plug into kies for update and shows thats the product code is (VD2) and thats mean is germany. So I try few VDI older version and same story. I try that apk check fus and try change ot but it wast I9300VDI… and also I try via kies and n/s and model after finish flash was say its xxella (VDI) And when I plug again say VD2.. pleas help me.

  66. hiii
    need ur help i.buy my s3 from china it has some chineze apps nd it does not support google play its android version is 4.1.9 nd its baseband version is I9300DDKL1
    i live in india plz help me how can.i.change its software into indian software

  67. hello there. I’m justwacky and i’m curious about how this csc thing works. I know a bit of information thanks to your introduction above. My problem right now is:

    -I want to change the csc code for a Lenovo phone (bought from china). The model is A280. The problem is, I can’t find the malaysian firmware for this. Can you please advice me on what to do? Many thanks.

  68. Hi Jayce I am not new to flashing or any of that stuff, but I do have a question: My phone’s csc is TTT(Trinidad and Tobago ) and I think they lag about 1 month behind of BTU(UK or EURO) firmware on updates. I do have everything I need in the original firmware(TTT), but would you recommed flashing the phone to lets say UK(BTU)? One thing I want to point out is in 4.1.2 Samsung removed few input languages, just don’t know why. I even emailed Samsung and the reply was that indeed some languages were removed. Thanks

      • I don’t really need it, the only thing is that UK’s variant seems to have more updates of some sort. When I check sammobile website I see that UK version had few 4.1.2 updates. May be these are only minor bug fixes….Thanks

  69. Hey help plz! i live in pakistan! i flashed my international gti9300 s3 with unofficial jb 4.2 rom! after that my region changed to afr! before it was pak! now ive flashed with 4.1.2 stock of pakistan many times but csc wont change! help what to do? plz need help!

  70. Hy jayce…!!
    how can we know that the firmware csc and device is matched??
    as my fimware is i9000xxjvu and th device is i9000oaxjvi..plz guide

  71. hi sir,

    i have samsung galaxy s3(I9305)LTE version my CSC code is showing as XSD am living in uae.when am connecting to samsung kies it giving me the folowing message “your device current firmware version is not supported to update firmware via kies”

    how can i get rid of this issue and get all updates via kies for united arab emirates?if CSC changing will help what code i have to use?

  72. If I flash my s3 to a different region, using an official rom, would it update with kies later? And what is the csc for Saudi Arabia? I found two: JED and KSA, whats the difference between the two, which one should I choose?

  73. Hi Jayce πŸ™‚

    I see that u know a lot of things about android stuff πŸ™‚ please answer on my post when you have time πŸ™‚

    Prob, is that i wanna receive updates via KIES , what should i change in my phone? i wanna get UK region so i could get updates when people from UK gets them..

    Any suggestions?

    My product code : GT-I9300MBKOR
    PDA: I9300XXEMG4
    Phone:I9300XXEMG4
    CSC: I9300XXEMG4

    Thank you in advance!

  74. Sent a Samsung galaxy S3 to Trinidad and Tobago it was unlocked everything works my friend has new SIM card but won’t call text or receive calls have spent so much money trying to fix so frustrated can you help

  75. I did the method on my I9305. and it claims “UNKNOWN APP”. Is it different for 9305 or same?
    it’s I9305XXUFOA1 (android 4.4.4)

LEAVE A REPLY

Please enter your comment!
Please enter your name here