Download Android 2.3.2 Gingerbread NAND ROM for HTC HD2

Having SMS issue on your Gingerbread? No worry, here is the fix for it ~ Android 2.3.2. It is almost pure gingerbread build from Google official git and using Huanyu kernel cooked by xda-developer, iamgpc. It is loaded with latest Google applications, Superuser and Nexus S Live Wallpaper.

Android 2.3.2 Gingerbread on HTC HD2

Stock 3D Launcher
Software information

Note – Wi-Fi Tethering, camcorder and Facebook have issue.

Installation guide ~ How to Install NAND Android on HTC HD2? (Video)

Download iamgpc Android 2.3.2 Gingerbread v9 [Kernel: gpc#2] NAND ROM here.

  • MySchizoBuddy

    can you post the quadrant benchmarks

    • Quadrant Benchmark does not work on Gingerbread yet. So no score. I myself also want to know. πŸ˜‰

  • MySchizoBuddy

    how does this compare to the MDJ CyanogenMod v2.6. It too has 2.3.2

    • notorious662

      IMO…I would just give this a try. I was skeptical, but I like it over CM. Of course, my opinion.

      • notorious662

        Also I forgot to mention I am tmous and this ROM allowed me to send pic messages due to tmo system can identify phone as HTC HD2.

  • notorious662

    This build is performance fast…some FC for minor apps, but very nice with small fix for USB tethering. Im happy.

  • Falco Hospes

    And the battery problem?
    Many people has a battery problem, if the battery is full, it get empty in few hours..

    • NAND Android battery life is the same as Windows Mobile 6.5 (at least for me). πŸ˜‰

  • Johan

    I seem to have an issue with the SD-card, it’s an 8 gb card but Android does not recognize it

    When I take the card out i says the card is out, when i replace it the card is not recognized

    Known issue ?

    Btw: great build !!! πŸ™‚

    • Nope, my SD card is working properly on it. Might be partition issue with your card. Try to format it and start again. πŸ˜‰

      • Johan

        will try this evening if this helps πŸ™‚

        • Johan

          Hmmmzzz, no solution till so far. Formatted the card on the pc (FAT32, 8 gb).
          System still doesn’t see the card…

          Should I do something with partitions ?

          • How many partition do you have in your SD card? Delete all of them and create 1 FAT32 partition only. Then try again.

            • Johan

              Finally, i bought a new sd card and stuff works like it should πŸ™‚
              Thnx for your support anyway !

  • Falco Hospes

    Hey Jayce

    Can you send me a download link for a good working NAND Android build?
    Google gives me always old shit when i searching for it.


  • Antonio

    Hi Jayce,
    Its great ROM. I just flash it yesterday evening. Everything works fine. But still no HP keypad version. The hunyu key is not in handwriting mode. I could see your video on Core Droid has those handwriting function. Actually I really like the Gingerbread built. Smooth and save battery life. Except the keypad function.

    • Tom

      Hey I just flashed NAND Android onto my phone, but “process is not responding”.
      How do i fix it?

  • Tom

    I just flashed NAND Android onto my phone, but “process is not responding”.
    How do i fix it?

    • Try to reboot the phone see. If the problem still exist, install the latest version XDA website. Or try other ROM.

  • Erich Tiong

    Thanks for sharing. πŸ™‚

  • Hi Jayce

    I downloaded gingerbread 2.3.1 last month from your website, its great

    and thank you very much for sharing! but i couldnt fix the GPS problem.

    Does GPS work on this version? Or is there any fix for 2.3.1 ? That way I

    dont have to download this new version…

    • Based on ROM chef, GPS should be working (but I did not test it).

      • A GNC

        I`ve updated the last ROM on before installing gingerbread?

        • Sorry, I can’t get you.

  • Joshua

    Help… I am running froyo 2.2 on my hd2, how do I get back into bootloader to update to 2.3.2

    • Using MAGLDR? If yes, power on your phone and don’t let go power button. It will load into MAGLDR bootloader.

  • Xenos

    I have flashed this rom but unfortunatly it stucks on htc and never enter to inside the android i have left it hours but it didnt run

  • Joshua

    can anyone get the camcorder to work on High (30m) or YouTube (High, 10m)??? Please help me…

  • mark

    I have the hd2 running on froyo 2.2 work great. I saw the link for ginger bread 2.3.2 and want to install it. i downloaded it and opened with 7 but dont know which file to run. any help would be appreciated!

    • Run.exe

      • mark

        do i have to sync it to my pc first. if so, htc sync will not recognize when i connect it via the usb.

        • mark

          it also said the readme file was not in the file
          sorry for all the questions but you seem to be the most knowledgable by far.

        • Did you install HSPL3, radio 2.15 and MAGLDR?

        • mikekiller

          well, just shutdown your phone.
          download win sync program to your PC and install it.
          connect your phone via USB to your PC and start the sync program.
          press power button and vol down at same time until your phone start to a 3 color page.
          when you see in your phone the “USB” logo, run the .exe in your pc…
          that work for me.

  • Solida

    Hi, i just back from WP7 to this rom
    but i can’t find where is the FM radio.

    So could you all tell me where is it, and how to find it?
    my device is HD2

  • Solida

    Hi, i just back from wp7 to this rom and what to know where can i fine the FM radio cos now i don’t see it.

    • Sorry, I am not sure this build have FM radio built-in or not. But I know MIUI Android ROM has FM radio app.

  • solida

    MIUI Android ROM? what is this? and 2.3.3 this rom don’t have FM radio, so is there any app in Android Market that i can download the FM Radio?

  • bodysly

    Hi Jayce,

    I installed gingerbread 2.3.2 on my HTC HD2 and it works perfectly.

    The only problem is that now my PC does not recognize the device when connected via the USB. Better, the “safely remove hardware” utility appears (I installed the google USB driver downloading it from android sdk) but the PC is not able to read the device as a removable disk.

    What can I do?

    Thanks in advance

    • You need to enable USB disk storage at your phone after connected with USB cable.

      • bodysly

        You are simply a genius (and I’m simply a stupid) !!

        Last question (hopefully): I’d like to use a bigger SD card. Can I change the current one or it may contain features necessary in order to run gingerbread 2.3.2?


        • Nobody is stupid as we don’t know everything. We ask to learn. I am asking too if I don’t know. πŸ˜‰

          Just copy everything from your old SD card to new bigger SD card will do.

          • khurram

            how i can download 2.3.3 andriod for my htc hd 2

            • Follow the guide in the post…

  • jokerz

    hi, can i do this on a t-mobile htc hd2 too?

    • Yes, it should be.

      • jokerz

        thanks a bunch, also i was wondering if this version

        is the same as the one you listed here

        • Sorry, no idea.

          • That version from the link that was just listed here will install on an HTC HD2 on T-Mobile USA only. There is a radio adjustment (different download) that can work for other countries as well, if you need it to. – There is a video attached to the article.



  • slung

    jayce, i just installed gpc_hd2_gingerbread_v9 n now my hd2 just loading with the screen [android] why is happening n what should i do now?

  • slung

    jayce, did u know how to set mp3 to ringtones n new message?

  • Joshua

    When is there gonna be an update from 2.3.2???

  • Joshua

    can anyone get the camcorder to work on High (30m) or YouTube (High, 10m)??? Please help me…

  • Kyle

    is this the final build? if not, can you give me a more recent link to the latest build?

  • elgaml

    hi what is the best android for htc hd2

  • xflash

    It works for month nearly without problems!!!
    just great work!!!

  • Reggie

    Jayce, what MAGLDR should i use for gingerbread 111 or 113 ?

    • Either one is okay. But prefer latest v1.13.

  • Hey Jayce, I got a question that you can help me with. I downloaded a NAND Android 2.2 on my htc hd2 and works like a charm and I would like to known can the device be upgraded to gingerbread 2.3 just by flashing the ROM or do I have to follow the HSPLR3, MAGLDR combo first. Please explain the process.


    • You can skip those components that you already have. Just install Android ROM will do in your case.

  • ivo

    problem with power up it takes more then 3 min to power up and sometimes it would’nt even power up

    • Try other latest Android ROM. Latest is always the best.

  • mrX

    hi jayce i have htc hd2 and i download the Rom but can u please tell me step by step what i do to install it on my phone and make it work properly thanx

  • shadab

    wi-fi theatring is not working in htc hd2 after installation of android ginger-bread 2.3.2
    plz give me some solutions.

    • This is an old Android ROM. Please use latest one at XDA website.

  • paul

    please i can’t get acces to multiupload where should go next to get the rom for gingerbread 2.3

    • XDA website. If still cannot find it there, then no more already.

  • sabbir

    can’t download ..pls give me another link

    • Sorry sabbir, I don’t have other download link. Try to find at XDA website see.