Yeah… I love HTC Sense on Android. Get used to it on Windows Mobile and cannot live without it on Android world too. Mdeejay Froyo Sense NextSense Android ROM is one of the best Android ROM that I tried. It is running smooth and no touch screen freeze issue so far. A must try… Check out below video ~ Android Mdeejay Froyo Sense v2.3 NextSense Demo on HTC HD2.
Installation guide ~ How to install Android 2.2 Froyo on HTC HD2?
Download Android Mdeejay Froyo Sense v2.3 NextSense ROM here.
hey jayce! does this build have any battery-drain issues? most android ROMs I’ve downloaded drain a whole lot of battery power. How is your experience with this one?
Not sure. Because I did not play long enough with it. I load Android to play games. Then off to Windows Mobile when finish. Did not stay in Android all the time. 😉
my problem is when my phone turns off and i re-open it then it will not recognize my network (vodafone qatar), it will go to vodafone netherland, thus, it wont pick up any signal here. Have tried so many things and i will end up hard resetting my phone, after that it will recognize my vodafone qatar sim then I can launch android. I’m afraid that hard resetting always will ruin my htc hd2.
Can you give me advice or should I re-flash my rom?
Not sure. But hard reset offer won’t broke your phone. It just like format HDD.
thanks! btw, i’ve been reading ur blogs and it was very helpful.
Jayce, is the rom install inside the phone itself or the card ? what if i do it and half way it hang or something, then i need to redo or worst put back the old windows platform?
Android is installed at SD card. No impact to Windows Mobile. 😉
Jayce, i load it for the first time but it hang at Jumping to kernel (custom)..need to wait is it?
First boot takes around 5 minutes. And no more than 10 minutes.
Ugh why cant it work in the US mine only says UK cause i can get any 3G service so no internet unless i use my wifi what can i do to update this or make it work because i do have T-Mobile an it would work much better if i could use everything on my phone
hey Jayce how are u?. i have a problem with android when installed on my hd2 and i wanted to know if u can help me with it.After setting up about a hr or so the lock screen goes blank and i get no response from my device. do you have any idea whats causing it?
hey Jayce how are u?. i have a problem with android when installed on my hd2 and i wanted to know if u can help me with it.After setting up about a hr or so the lock screen goes blank and i get no response from my device. do you have any idea whats causing it? thank you
jarrel u need to enter the apn here is the site with all apn info
google.com/support/forum/p/android/thread?tid=728949efd681db72&hl=en
thank you but i did that already an my internet works but i’m still not able to receive my mms messages
Jayce, I’m trying to download Adndroid on my HTC HD2 but I don’t get any result and android is not running on my phone, black screen is coming up and downloading all the data but I don’t get android. I followed all procedures but still doesn’t work. pls help me. Thx
I have successfully installed the Android 2.2 Froyo 2.2..Everything works fine except I get screen freeze periodically and bit frustrated when I am playing games.
Install this Mdeejay Froyo sense v2.3 nextsense. Repsonse seems better but I cannot get to access my 3G internet even though my mobile connection is on and did not reflect any error; I can access via WiFi.
anyone can help? thanks
hi jayse ooi,
im new in install this froyo to my HD2……
if i wanna install this “Mdeejay Froyo Sense NextSense Android ROM”, did i need to install “Android 2.2 Froyo 2.2” first??? Install it In my SD card?
Please advise…. thank you….. 🙂
Dear clownz,
You do not need to install “Android 2.2 Froyo 2.2″ first.
Anyway, found the cause due to the APN is not setup at all. Manually setup resolves the issue.
thanks all.
Dear CM Siew,
thanx for your reply,
Means i only have to install “Mdeejay Froyo Sense NextSense Android ROM” rite?
The method same like install Froyo 2.2 ?
Tq
Hi All,
Why im stuck at hang at “Jumping to kernel (custom)” for a long time?
Did i need to install other apps before using this “Mdeejay Froyo Sense NextSense Android ROM” ?
thanx….
Did you install HardSPL3 and correct radio ROM?
Not yet bro, so i have to install both of that?
Yes. And I am using 2.12 radio. You can try that too.
HardSPL3 look scary method for me……. izzit ok? if something happen, where i can find the original “SPL 1.42.0000”, coz that is my original SPL.
This is the price you need to pay. I installed it. So far so good.
To revert back, follow the uninstall instructions at https://www.jayceooi.com/2010/08/10/how-to-flash-hardspl3-on-htc-hd2/ and use this ROM ~ https://www.jayceooi.com/2010/01/23/rom-version-1-66-707-1-upgrade-for-htc-hd2/
But I did not try it yet. 😛
LOL….
ok, thank you for your help bro…..
hey Jayce
i have a problem with android when installed on my hd2 and i wanted to know if u can help me with it.
After using “HARET” and the android screen appear, the lock screen goes blank and i get no response from my device. do you have any idea whats causing it? thank you
Anyone tried to sync Andriod 2.2 with Outlook using HTC Sync v3? after setup, the communication was established but nothing get sync. There is no option within the HTC Sync v3 to setup the outlook reference.
Not sure what I have missed. Any help is appreciated. Thanks.
Hi, i was wondering if you need an SD card for this or if i can just put it on the phone storage card, also does this rom have swype, if not would i be able to get it?
SD card is required. Swype can be downloaded from Android Market.
alright thanks a lot
wait I just realized my memory is a 16g memory card that will work right
Yes, it should.
I installed this and love it but when I use the market it downloads and fails to install, this is after I use the market enabler
Hi Jayce, I install the latest version from Mdeejay, the second time i reboot it hang on HTC logo.
You face this before?
Yes. I got blue screen sometimes. But not sure is from this build or not. I just delete Android folder and copy again. Everything works fine then…
errrrgggg…..really need to find other better froyo…this cannot be work on mine anymore. I restarted few times also cannot anymore and now my windows is slowing down on me.
The logo of Android is keeps blinking on the screen while booting. Waited for a long time its still blinking -.-
It’s time to delete it and start over again. 😛
hey, i m having trouble installing froyo 3.2 and the mdeejay nextsense, i have flashed my rom and my hd2 is on the touch of glass rom right now, but when i launch the android file it goes to the black screen with the green htc logo on it, and it sits there for like an hour and does nothing, when i installed the older froyos it took about 5-10 min to finish and run. ive reformatted my sd card and reflashed the rom and same thing, any ideas on what i can do to fix this issue?
Old version is working for you? And new version cannot?
YES!!
Yes?
I encountered the same problem! I’ve installed rom after rom and radio after radio and still get that black screen with the green htc logo. I even tried to let it boot overnight and still nothing. This only happens with new android builds. Radio: 2.14.50 and dexter rom that got updated today
Hey everything works beautifully except for the fact that it wont wake up after i sleep the phone.. (black unresponsive screen) what do i do? plz help 🙂
I faced that issue too. Pressing few power buttons will wake it up. Seem like a kernel issue.
I installed Mdeejay Froyo and it’s AWESOME! EXCELLENT JOB…WOW! But I have a problem – I turned off my phone and turned it back on & it booted to Windows…uggh! How do I get it to go back to Froyo??? HELP!!!
– Using file explorer in Windows Mobile, inside the ‘Android’ folder run CLRCAD.exe (to fix audio issue). Don’t worry, it will appear to do nothing, that is normal.
– Run Haret.exe.
So if I turn off android on hd2 and reboot the device, must I first log into windows and reinstall android? Is there a way of how to initially boot up android and not log into windows first??
I would really appreciate your reply
Yes, it needs to boot Windows Mobile first. Then load Android.
HOW DO I FIX MY FONE WHEN THE SCREEN GOES TO SLEEP N WONT TURN BACK ON. ? ANY HELP PLEASE
Sorry, no idea. Please consult ROM chef.
I install the froyostone sense v3.2 on my T-MOBILE HD2 AND IT WORKS SMOOTHLY. HOWEVER I CANNOT CONNECT TO MY 3G NETWORK. ANY SUGGESTIONS OF HOW TO FIX THE PROBLEM THANK YOU
https://www.jayceooi.com/2011/01/20/apn-settings-for-android-to-enable-internet-mms/
Hi Jayce,
I installed Android with FroYo_Sense in htc hd2, OS is stable but when I make calls out and receive call theres a cracking sound and all the music or ringtones I play sounds like the Tempo have changed. Pls advise
Try this see – https://www.jayceooi.com/2010/09/25/how-to-fix-robotic-voice-in-android-htc-hd2/
My current ROM version is 3.14.707.3 (04666) wee
Radio version is 2.15.50.14
do i still need to flash HardSPL3 on my HTC HD2 ?
Can it be reverted even after flash HardSPL to original state?
Or is there any alternatives to fix the Robotic voice.
& today I experienced that the touch screen freezes for a while.
You can try other Android ROM like darkstone SuperRAM FroYo – https://www.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
Yes, you can remove HSPL by installing Windows Mobile through SD card – https://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
Is there any version of ginger bread that works with Video Cam and GPS for HD2 and is it possible to have HTC sence sepreatly installed.
Thanks
HTC Sense build with Gingerbread is not perfect yet. No, we can’t install HTC Sense on non Sense build.
I tried installing Ram version of Gingerbread and its stable now. Problem is Video Cam, GPS, USB doesn’t work. is there any fix?
I don’t think so because the ROM development was discontinued…
am using mdeejay froyo sense v.2.3 nextsense, some apps like lane splitter, airattack, google maps I couldnt install and also not able to update the OS to gingerbread.
and also advise the complete gingerbread with full functioning URL to download.
Thanks
https://www.jayceooi.com/2011/05/19/top-android-2-3-4-gingerbread-nand-android-rom-for-htc-hd2/
any ram install version ?
Those are NAND internal storage builds which I don’t think they use RAM like SD Android. For SD Android, check out XDA for more information as I did not research much on them. http://forum.xda-developers.com/forumdisplay.php?f=735
HE JAYCE . i HAVE A SILLY QUESTION FOR YOU, i WOULD LIKE TO RUN AN ANDROID NAND BUILD FOR EVERYDAY USE AND USE ANOTHER BUILD TO PLAY GAMES WITH IS THIS POSSIBLE, WAS THINKING BOYPPC V19 NAND FOR EVERYDAY AND DARKSTONE SUPERRAM FOR GAMES, SO CAN I BOOT UP SUPERRAM FROM ANDROID. Btw thanks for all the great info on this site.
Yes, it should be possible but I did not test it. Just install NAND Android and use SD Android that is based on MAGLDR. You can get more information at XDA.
trying to install gingerbread with all working stuffs in my htc hd2, which is the best version so far released? and after flashing the rom can i have the old windows 6.5 recovered ?
Need ur help, Tks
https://www.jayceooi.com/2011/10/04/download-android-2-3-7-cm7-nand-a2sd-zip-rom-for-htc-hd2/
https://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
and am also trying to get Android CM7 2.3.3 Gingerbread SD on HD2, link published in web is broken, Any idea where i can download it from ?
Sorry, nope. Try to Google…