The latest Android 3.0 Honeycomb is not meant for smartphone. But you can have the look of it on Gingerbread now. XDA Developer, boyppc cooked one for us all. The NAND Android ROM is based on Android 2.3.3 Gingerbread and using GL_Core_v7 Kernel.


AWD Launcher
Software information

I love the nice Honeycomb theme and animation. Try it for yourself to find out…

SD card partition guide ~ How to create ext3 partition on SD card with ClockworkMod Recovery?

Installation guide ~ How to Install NAND Android on HTC HD2 with ClockworkMod Recovery? (Video)

Download BOYPPC-SHIFTPDA GINGER v4 [Kernel: GL_Core_v7] NAND A2SD+ RAM Zip ROM here.

  • hi jayce,

    i tried to install this rom to my htc hd2 but i stucked in the ‘nand yaffs2 boot mount failed’ in htc hd2. plz help me how i need to fix this error.

    • Do you have EXT3 partition on your SD card?

      • no. i dont made my card ext3 partition. before this i simply tried to install [CWR-RAM]_BOYPPC-SHIFTPDA_GINGER_V5_(10.Mar) through daf usb flasher. then i got this error, now battery has drained out. wht i need to do now to get my device back

        • EXT3 partition is a must for this ROM. Try to plug in power and charge it. It should charge a little bit. Then install back the ROM that working for you.

          • hi how can i make ext3 partiton. i had 16 gb card

            • Just follow the SD card partition guide in the post.

              • i created sd card partition as you shown in thread. then i tried to install BOYPPC-SHIFTPDA GINGER NAND Android A2SD+ RAM Zip ROM using clockworkmod recovery, after installation finished, in rebooting i stucked up in android logo. i dont know where i was wrong. again i flashed to android 2.2 froyo. plz inform me in detail how i need to flash this rom


                • Try to wipe all the data before install this Android ROM. If still cannot, then this Android ROM might not suite you. Try another one.

        • thanks da.
          i got bak android 2,2 fryo. i just did what you’ve told and every thing is working fine.

  • hspl is cotullahspl ox40, spl-2.08. radio rom is orginally german rom, t mobile set.

  • Mike

    I am going to put this on my HD2 when my new one comes in but i really would like to know if this one has 3G

    • Yes, 3G is working for me on this version.

  • Juki

    Hi Jayce !!!

    I have WP7 on my hd2 can i just follow this steps to get this ROM in to hd2, or do i have to remove WP7 from my hd2…tnx

  • james

    How stable is this build

  • Juki

    Jayce i’m stuck, i did everything i supposed to do but when hd2 restarts after i install rom whit ClockworkMod Recovery an error approaches “NAND yaffs2 boot mount faild” what to do i tried 10 times from the beginning it din’t help…..plz help me…..tnx

    • Can you tell me what had you done? This will narrow down the issue. Thanks.

  • Mike

    hi jayce my hd2 keeps on restarting, it gets as far as the little android logo and thats it goes blank and restarts

    • Using this ROM? Do you have EXT3 partition on your SD card?

  • hi
    how do i install magldr 1.13 my device is curently running on android 2.2

    • Just install it like previous version.

      • ya thanks. installed it succesfully

        • Glad to know that. πŸ™‚

  • ya thanks for your continual help. i installed this rom. now i’m using hspl 4, emagldr 1.13. it’s working fine but battery wont come as long as android froyo 2,2. i”m thinking to go back again for android froyo 2.2. so sweet of you.

  • Lombardo

    Thanks for this man it is working all right in my hd2 and it look very slik πŸ˜‰